low power loss, high efficiency high current capability, low forward voltage drop. rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% symbol unit v rrm v v rms v v dc v i f(av) a i f(rms) a i fsm a i rrm a v f v i r ua ma dv/dt v/us cj pf r jc o c/w t j o c t stg o c note3: mount on heatsink size of 4" x 6" x 0.25" al-plate -55 to + 150 10,000 mechanical data note2: measured at 1 mhz and applied reverse voltage of 4.0 v d.c. high surge current capabilitry features plastic material used carries underwriters laboratory classification 94v-0 typical thermal resistance (note 3) maximum instantaneous forward voltage (pulse test: tp=300us, < 1%) @ 5a / ta=25 @ 5a / ta=125 @ 10a / ta=25 @ 10a / ta=125 typ. 0.3 0.5 dimensions in inches and (millimeters) 10 max. 20 15 mbrf10l100ct typical junction capacitance (note 2) peak repetitive reverse surge current ( note 1) mounting torque:5 in-lbs. max. mbrf10l100ct ito-220ab low vf isolated 10.0amp schottky barrier rectifier version:a10 operating temperature range storage temperature range 185 5.5 note1: 2.0us pulse width, f=1.0khz, continues 10 cycles maximum reverse current (pulse test: tp=300us, < 1%) ta=25 ta=125 -55 to + 150 voltage rate of change (rated v r ) parameter maximum ratings and electrical characteristics peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load 120 100 70 100 maximum rms voltage max. 0.76 0.65 0.85 0.71 typ. 0.73 0.59 0.82 0.66 polarity: as marked maximum average forward rectified current maximum dc blocking voltage weight: 1.7 grams maximum repetitive peak reverse voltage peak repetitive forward current (rated vr, square wave, 20khz) mounting position:any qualified as per aec-q101 terminals: pure tin plated leads, solderable per mil-std-202, method 208 guaranteed 10 1 for use in low voltage, high frequency inventor, freewheeling, and polarity protection application case: ito-220ab guard-ring for transient protection high temperature soldering guaranteed: 260 /10s/.375"(9.5mm) lead lengths 5 lbs tension pb rohs compliance rohs compliance
version:a10 ratings and characteristic curves (mbrf10l100ct) fig.1 maximum forward current derating curve 0 2 4 6 8 10 12 0 25 50 75 100 125 150 175 ambient temperature ( ) average forward current (a) resistive or inductive load fig. 2 maximum forward surge current 0 25 50 75 100 125 150 1 10 100 number of cycles at 60 hz peak forward surge current (a) 8.3ms single half sine wave fig. 4 typical reverse characteristics 0.01 0.1 1 10 100 1000 10000 10 20 30 40 50 60 70 80 90 100 percent of rated peak reverse voltage.(%) instantaneous reverse current. (ua) ta=25 ta=125 fig. 5 typical junction capacitance 10 100 1000 0.1 1 10 100 reverse voltage (v) capacitance (pf) fig. 3 typical forward characteristics 0.1 1 10 100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 forward voltage (v) instantaneous forward current (a) ta=125 ta=25 fig. 6 typical transient thermal impedance 0.1 1 10 100 0.01 0.1 1 10 100 t-pulse duration(s) transient thermal impedance ( / w)
|
